I want an oxygen trainer

[mycrofft]

Ideally, the top ten inches of an old D or E cylinder including the stem valve, and a regulator/tank level yoke. Does not need to work, better if it doesn't. Just want to teach people how to use a yoke. A fixed rate regulator would also be good, again, I can make it cosmetically acceptable.

Know of any sources? My local ones won't do it.

 

[IslandTime]

You might try contacting whoever does the hydros in your area, see if you can pick up a cylinder that failed, then just cut off the top of it. Of course that leaves you trying to find a yoke and regulator as well. Maybe check with a service company to see if they have any junkers.

 

[mycrofft]

You might try contacting whoever does the hydros in your area, see if you can pick up a cylinder that failed, then just cut off the top of it. Of course that leaves you trying to find a yoke and regulator as well. Maybe check with a service company to see if they have any junkers.

Good ideas. Tanks

 

[MMiz]

Why not pick up a cheap M6 oxygen cylinder on eBay for $12 and spend another $10 or so on a medical oxygen regulator. The bottle is tiny, and regulators are cheap on eBay.